Showing 49–60 of 239 results
30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA Module can be set high level or low level trigger by the jumper Power indicator light (green), relay status indicator light (red) Module Size:50mm*33mm*24mm Technical parameters: Voltage version:5V The static current:5mA […]
5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. Low-level amplifier active, input voltage range: 0-5V. Relay contact capacity 250V 10A, the output is normally open or closed. LED light is used to indicate the relay output state, can be directly controlled the standard interface by micro-controller […]
Micro USB: Standard micro USB mother mouth. TX : Transmit 5V : Volt current condenser
Operating Temperature: 0 to 50°C * Storage Temperature: -10 to 60°C * Dot Size: 0.65W * 0.60H mm * Character Size: 5.55W * 3.20H mm * View Area: 91.6W * 18.6H mm * Outline Dimension: 116W * 37H * 14T mm * Viewing Direction: 6 o’clock * Number of Data Line: 8 bit Parallel * […]
in Numbers : 5;Size (Approx.) : 19 x 15x 19mm/0.75″ x 0.59″ x 0.75″(L*W*T) Weight : 18g;Package Content : 2 x Power Relay Product Name : Power Relay;Model : SRD-05VDC-SL-C Coil Voltage : DC 5V;Load Capacity : 10A 250V/125VAC10A 30V/28VDC Material : Plastic, Metal;Color : Blue Suitable for domestic appliance, office machine, audio, equipment, automobile, […]
5V Step-Up Power Module Lithium Battery Charging Protection Board Boost Converter LED Display USB For DIY Charger 134N3P
In the case of translating between 3.3V and 5V system: VCCA connects to 3.3V power supply VCCB connects to 5V power supply GND connects to power negative pole respectively, the two power supply should be common-grounded with each other When Ax has TTL 3.3V input, Bx will get TTL 5V output When Bx has TTL […]
8 channel WS2812 5050 RGB LED lights built-in full color-driven development board 8 Bits
New Arrival ABS Case For UNO Kit Red Blue White Transparent Plastic Box Shell
Aluminum Alloy Electronic Scale YZC-133 Weighing Load Cell Sensor 10kg
Input : DC 4.5V–7V ( input voltage must be higher than the output voltage to 1V or more. ) Output : 3.3V, 800mA ( load current must not exceed 800ma) specially designed two pin mounting holes , can be directly fixed on hole board for extended experiments input and output using 2P single row pin […]
Onboard 8P chip carrier, can support AT24C256 series chips; Pin power supply, on-board power indicator; On-board pull-up resistor for I2C communications required ; All pins leads out and be marked, the address input and the write-protect pin direct jumper settings; PCB board size: 37mm * 12.5mm * 12mm (L * W * H) EEPROM stands […]
